239 results found

1. Adding Stock Value To Stock Take Approvals/Reports For Adjustments

   We've recently started using the app for stock taking which sends the reports to the Stock Take Approvals Report to sign off (a bit easier to see adjustments in bulk than the app, as where a 0 adjustment is it doesn't really need approving). However, we noticed nothing shows the value of the stock adjustment when a positive or negative stock take has occurred.

   Currently we ignore small adjustments and put this down to errors with picking usually. However, this doesn't consider the value of the products being ignored. Being able to see this would allow our management to prioritise higher value lines even where single unit adjustments occur. They can then dig deeper into what has happened.

   We've recently started using the app for stock taking which sends the reports to the Stock Take Approvals Report to sign off (a bit easier to see adjustments in bulk than the app, as where a 0 adjustment is it doesn't really need approving). However, we noticed nothing shows the value of the stock adjustment when a positive or negative stock take has occurred.

   Currently we ignore small adjustments and put this down to errors with picking usually. However, this doesn't consider the value of the products being ignored. Being able to see this would allow our management to prioritise… more

   2 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Reports  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

2. Introduce Mac Address Restriction

   Introduce Mac Address Restriction. As a company we can not ask staff without a company phone to use 2FA. We have staff members who work remotely, whether that be out on site or shows. Even there we can not rely on IP Address restriction, if the server goes down.

   2 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Other  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

3. EPOS add customer name instead of person making the order

   When taking payment for Goods over a trade counter have the ability to Enter a Name (Customer Name) so they have a personal receipt and we have a record of what item they have purchased.

   Currently the username of the person signed into Storefeeder gives no permanent record and some businesses that purchase from the Trade counter require a better solution that us writing their company name on the receipt so they can put through their accounts and reclaim VAT

   2 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   1 comment  ·  Customers  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

4. Auto merge Large Letter and Parcel shipping options.

   I have a lot of customers that make separate orders, some are parcel size, some large letter. Currently I need to arrange open orders alphabetically and manually scroll through merging orders from different shipping services. On a monday that could be hundreds of orders which takes forever. It would be useful to have a rule that merges these automatically or at least flag them up so they can be found quickly.

   2 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Shipping  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

5. helpful widgets on dashboard

   a few helpful widgets on the front page, showing, no parcel size attached to products and duplicate barcodes etc would be helpful.

   Thanks, Sam

   2 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Dashboard  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

6. Bulk Inventory Update and Product Import - automap / closest match relevant fields

   Automap or seek the closest match for the header rows when uploading via bulk inventory update or product import/export.

   The same functionality exists in CSV Order Import - you click a button to automatically map any matching headers. You still have to confirm that you want to map those headers before starting the CSV order import, and would envisage the same thing here.

   For example, in a bulk inventory update, I might have a file with three columns:

   SKU
   Name
   Inventory

   SF requires SKU and Inventory to do a Bulk Inventory Update. Therefore, the system would select those two fields and map automatically, before I confirm that those are the headers I wish to map, and then proceed.

   This would be a quality-of-life improvement and a small time saving.

   Automap or seek the closest match for the header rows when uploading via bulk inventory update or product import/export.

   The same functionality exists in CSV Order Import - you click a button to automatically map any matching headers. You still have to confirm that you want to map those headers before starting the CSV order import, and would envisage the same thing here.

   For example, in a bulk inventory update, I might have a file with three columns:

   SKU
   Name
   Inventory

   SF requires SKU and Inventory to do a Bulk Inventory Update. Therefore, the system would select those two fields… more

   2 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Import/Export  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

7. BigCommerce - Add "Free Shipping" to listing import/export

   The BigCommerce "Free Shipping" product setting can be changed manually on the listing page on StoreFeeder, but unfortunately it is not available in the listing import/export tool.

   Please consider adding this to the import/export tool so we can update this setting in bulk.

   2 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Import/Export  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

8. Intergation with Shift (ex Tuffnells/ Yodel)

   As you might be aware Shift bought Tuffnells and recently Yodel
   and become one of the major players as the new courier company for UK.

   Currently the only option to upload the new orders for Shift is through CSV file, which is time consuming.

   If there is a way for Shift to become one of the dedicated couriers on SF platform, that would make life easier.

   I'm sure there are many SF customers waiting for this feature...

   2 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Couriers  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

9. On the Warehouse Deliveries Page, Is it possible to add a notes section that is visible so rather than having to click into part complete

   On the Warehouse Deliveries Page,

   Is it possible to add a notes section that is visible so rather than having to click into part complete for example I can read a note I have added from the warehouse deliveries page.

   2 votes

   Vote Vote Vote

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Vote

   We’ll send you updates on this idea

   0 comments  ·  Warehouse  ·  Delete…  ·  Admin →
   How important is this to you?

   Not at all You must login first! Important You must login first! Critical You must login first!

   We're glad you're here

   Please sign in to leave feedback

   Signed in as (Sign out)

   Close

   Close

   Submit Rating

10. Kit/Bundle Pricing

    It is very difficult to fully use the kit/bundle pricing module when the margin has to be fixed within the bundle itself. You should be able to have the option to use the component item margins.

    Example.

    Item 1 - £1 plus 100% margin (normally 100%) = £2
    Item 2 - £1 plus 100% margin (normally 200%) = £2
    Total £4 (lost margin is £1)

    Item 1 - £1 plus 100% margin (normally 100%) = £2
    Item 2 - £1 plus 200% margin (normally 200%) = £3
    Total £5 (full margin is achieved)

    Discounts for bundling can still then be achieved in pricing profiles.

    It is very difficult to fully use the kit/bundle pricing module when the margin has to be fixed within the bundle itself. You should be able to have the option to use the component item margins.

    Example.

    Item 1 - £1 plus 100% margin (normally 100%) = £2
    Item 2 - £1 plus 100% margin (normally 200%) = £2
    Total £4 (lost margin is £1)

    Item 1 - £1 plus 100% margin (normally 100%) = £2
    Item 2 - £1 plus 200% margin (normally 200%) = £3
    Total £5 (full margin is achieved)

    Discounts for bundling can still then be… more

    2 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Products  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

11. Allow different emails to be used in email settings

    Currently we are restricted to using a single 'from' email when setting up email templates in SF. The same email is also used for sending purchase orders.

    It would be useful if we could choose which 'from' email is used for sending purchase orders so that when our suppliers reply to us it doesn't go to the wrong inbox.

    Currently we use a customer support email for our order emails / templates and replies to these emails go to our customer support team. I don't want replies from my suppliers regarding purchase orders being sent to the same team.

    It may also be useful to allow us to select different emails per channel.

    Currently we are restricted to using a single 'from' email when setting up email templates in SF. The same email is also used for sending purchase orders.

    It would be useful if we could choose which 'from' email is used for sending purchase orders so that when our suppliers reply to us it doesn't go to the wrong inbox.

    Currently we use a customer support email for our order emails / templates and replies to these emails go to our customer support team. I don't want replies from my suppliers regarding purchase orders being sent to the same team.

    It… more

    2 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Other  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

12. Get returns information from Amazon FBA

    We would like to view the Returns received on the Amazon FBA channel.
    As a next step, we would like to create a feed to our ERP similar to orders feed, so we could automatically create Credit notes for the returns.

    2 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Orders  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

13. Bring picker productivity back

    Hi, it would be nice to have the picker productivity report working for non PDA users.
    It seems since you have launched the PDA app the picker productivity report only shows our PDA user (which does not pick, only does deliveries)

    2 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Other  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

14. do not map

    We are just looking to put forward a request which would be very helpful when mapping products.
    When we have done new listings which contain various products that have already been created on store feeder we have to map these individually.
    For example we have a listing which is all of the white leatherette displays we have in stock. This listing would have close to 90 different products. To map this we have to individually click "do no map" on 89 of the products to map one of these to the correct item. Then repeat 90 times to all items are correctly mapped.
    If there was a drop down in this section where we could just set all products to "do not map" then we would just have to change the one product we need to update and this would save hours of work when it comes to mapping these listings
    Thanks

    We are just looking to put forward a request which would be very helpful when mapping products.
    When we have done new listings which contain various products that have already been created on store feeder we have to map these individually.
    For example we have a listing which is all of the white leatherette displays we have in stock. This listing would have close to 90 different products. To map this we have to individually click "do no map" on 89 of the products to map one of these to the correct item. Then repeat 90 times to all items… more

    2 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Listings  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

15. I would like MPN as an exportable field on the listing level.

    I would like MPN as an exportable field on the listing level.

    2 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  Import/Export  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

16. Add note to pickwave when order is removed from a pickwave

    Currently if an order is removed from a pickwave a message pops up on the scanner at the end of the pickers wave to say that an item has been removed, however it doesn't go anywhere else.

    It would be useful if this note was also added to the pickwave notes on the pickwave screen

    The reason for this is that the picker may have finished the pickwave before the item is removed, therefore they never see the note. If it's added to the notes on the pickwave as well then at least the packer knows why they have something left in the trolley at the end.

    Currently if an order is removed from a pickwave a message pops up on the scanner at the end of the pickers wave to say that an item has been removed, however it doesn't go anywhere else.

    It would be useful if this note was also added to the pickwave notes on the pickwave screen

    The reason for this is that the picker may have finished the pickwave before the item is removed, therefore they never see the note. If it's added to the notes on the pickwave as well then at least the packer knows why they have something… more

    2 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    under review  ·  0 comments  ·  Warehouse  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

17. Update order notes using the API

    It would be great to be able to use the API function to allow us to update notes on a specific order

    2 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    1 comment  ·  Orders  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

18. End special price when inventory drops to specified level

    Currently special prices are controlled only by dates. However when we have too much stock on some SKUs, it would be hugely helpful to be able to place products on special price until the stock drops to a specified level, at which point the special price would end.

    2 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Listings  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

19. Item Options - Don't remove from view after dispatch

    Personalisation from Etsy and Shopify orders pull through to the 'Item Options' section on each product line on the Order Page. Whilst this is okay as we have added a section on our invoices to display this Item Options information, once the order is dispatched on StoreFeeder this box disappears and you cannot see the info.

    We then have to either 'reprint' the invoice to load it and see what details were written, or we have to search for this information directly on Etsy/Shopify. This is time consuming and seems unnecessary.

    It would be great if the personalisation was pulled through to a different section on the order (like into the Special instructions Box, or another box), or alternatively to still have the 'Item Options' section visible after dispatching an order so you can refer back to it if needed.

    Personalisation from Etsy and Shopify orders pull through to the 'Item Options' section on each product line on the Order Page. Whilst this is okay as we have added a section on our invoices to display this Item Options information, once the order is dispatched on StoreFeeder this box disappears and you cannot see the info.

    We then have to either 'reprint' the invoice to load it and see what details were written, or we have to search for this information directly on Etsy/Shopify. This is time consuming and seems unnecessary.

    It would be great if the personalisation was pulled… more

    2 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Orders  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating

20. Xero Draft Invoice

    Hi
    This is a feature request, it would be good if it was possible to send the order to zero as a draft, or to send individually by request, my issue is that we have to apply discounts, shipping etc and check the prices.
    Currently it's a long copy and paste process.
    Thanks

    2 votes

    Vote Vote Vote

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Vote

    We’ll send you updates on this idea

    0 comments  ·  Other  ·  Delete…  ·  Admin →
    How important is this to you?

    Not at all You must login first! Important You must login first! Critical You must login first!

    We're glad you're here

    Please sign in to leave feedback

    Signed in as (Sign out)

    Close

    Close

    Submit Rating
    started  ·  AdminSupport (Customer Support Agent, StoreFeeder) responded

    This is current in development now.  You will be able to choode the status for your orders.